Hopefully the B200 error should be cleared. press the on button quickly 5 times (alternatively you press and hold the stop button for 3 seconds > press the on button and release stop button > while still pressing on button press the stop button 5 times > release all buttons).open the top and move the print cartridges section along the rials to the left of the machine.If replacing the ink cartridges does not clear the error then try the following steps: The b200 error can sometimes show if one or more of your ink cartridge is low so the first thing to do is check you ink levels and replace any cartridges as necessary. This should clear your error 6c10 or 6a80 error. when dry close the top of the printer and plug back in.leave the top of the printer open for a few minutes to dry all the cleaned areas.clean the rail that the tray is mounted on.clean all around and inside the tray using a q-tip dipped in rubbing alcohol.open the top of the printer and locate the ink tray (it may be covered in ink but is originally white).To clean your MX870 of accumulated ink/ debris do the following: You can do this using a q-tip to reach inside, rubbing alcohol will help to remove the ink from any areas it has accumulated.

If error 6c10 or 6a80 still persists then you may need to clean the ink pads and printheads inside the printer. The print cartridge will move to the centre and when it does so, close the top.

If you are seeing these or any other Canon errors, then follow the steps set out below to troubleshoot the error and get your MX870 device working again. Unfortunately it is not always so simple, so if your 6a80 or 6c10 error still persists, read on. If the error was being shown incorrectly then this action should clear it and all should be working fine again. The first thing to do when presented with either of these Printer errors, is to turn the printer off and unplug for about 10 minutes. Download Canon MX870 Drivers Updates Canon MX870 error 6a80? Canon MX870 error 6c10? Canon MX870 b200 error?

Canon mx870 driver for mac high sierra